Yealink VC110 - Presentation

User Guide for Yealink VC110 Video Conferencing Endpoint
98
3. Press (Back soft key) to return.
To view call statistics via the web user interface, go to the path Home (Hover your cursor over
the other party on the left side of the screen, and then click ).
Presentation
The endpoint supports sharing video and documents on a PC while simultaneously displaying
the main video. We recommend using a dual display configuration for sharing contents. During
a call, if a PC is connected to the VC110 main endpoint, the endpoint will start a presentation
automatically. Both local and remote display devices will share contents.
You can also start/end a presentation during a call via the remote control or video conferencing
phone (ensure a PC is connected to the VC110 main endpoint). If you disconnect the PC, the
presentation will end automatically.
Only one presentation can be shared at a time. A presentation started later will replace the
previous presentation.
To start/end a presentation during a call:
Do one of the following:
- Press (Presentation soft key) on the remote control to start a presentation.
Press (Presentation soft key) on the remote control again to end a presentation.
- Press on the video conferencing phone to start a presentation.
Press again to end a presentation.