Yealink VC110 - LED Instructions

User Guide for Yealink VC110 Video Conferencing Endpoint
22
LED Instructions
Indicator LED on the VC110 all-in-one unit:
LED Status
Description
Solid green
The VC110 is powered on.
Solid red
The VC110 is in sleep mode.
Solid orange
The VC110 is abnormal (e.g., network unavailable, update
failure).
Flashing green
Press the key on the remote control.
Off
The VC110 is powered off, or is not connect to the power
adapter.
Indicator LED on the video conferencing phone:
LED Status
Description
Solid red
The phone is initializing.
The video conferencing phone is muted when the VC110 is
during a call.
Flashing red
The phone is ringing.
Solid green
The phone is placing a call.
There is an active call on the phone.
Off
The phone is not connected to the cable hub.
The phone is idle.
Battery indicator LED on the VCM60 video conferencing wireless microphone:
LED Status
Description
Solid green
The VCM60 is turned on within the first 5 seconds.
The battery capacity reaches 100% during charging.
Flashing red
The battery capacity can maintain less than 1 hour.
Flashing green
The VCM60 is charging.
Off
Other status.
Mute indicator LED on the VCM60 video conferencing wireless microphone:
LED Status
Description
Fast flashing green
The VCM60 is searching the dongle.
Green and in breathing
state
The VCM60 registers with the dongle, and then enters the
online standby mode.
Solid green
The VC110 is placing a call.
The VC110 is in a call.