Using the VC110 Video Conferencing Endpoint
89
Placing a Call Using the Remote Control
To place a call using the remote control:
1. Press (Call soft key), or any numeric key to enter the dialing screen.
2. Select the desired account type from the pull-down list of Call Type before calling.
If you select Auto, the endpoint will select the desired account type according to this
priority: Cloud platform>H.323 account>SIP account>H.323>SIP IP Call. For example: a
number is added to your local directory and Cloud directory at the same time, when you
dial this number, the endpoint will use Yealink Cloud account to establish the call.
For more information, refer to onpage.
3. Enter the desired number using the keypad or the on-screen keyboard.
You can also select the desired record from the recent call history.
4. Press (Voice/Video soft key) to change call mode.
5. Press or .
Placing a Call Using the Video Conferencing Phone
To place a call using the video conferencing phone:
1. Enter the desired number using the keypad.
2. Press , or the Send soft key.
To Next Page
Loading...
