User Guide for Yealink VC110 Video Conferencing Endpoint
130
3. Press or to scroll to select the Wireless Micpod, and then press .
VCM60 information can be viewed via the web user interface at the path Status-> Wireless
Micpod.
Registering and Unregistering the VCM60
The VCM60 video conferencing wireless microphone and dongle are automatically “paired” at
the factory. But In following cases, you may need to deregister or register the VCM60 video
conferencing wireless microphone manually.
The device is broken, new VCM60 or new dongle need to be repaired.
VCM60 and dongle need to be paired during the production.
You can only register and unregister the VCM60 via the web user interface. The web user
interface will display the model and product ID of the dongle and video conferencing wireless
microphone.
To deregister the VCM60 via web user interface:
1. Click on Setting->Wireless Micpod.
To Next Page
Loading...
