Using the VC110 Video Conferencing Endpoint
97
- If video conferencing phone is connected to the Audio In port of cable hub.
You can press to mute the call. The LED indicators on the video conferencing phone
will illuminate solid red. And the LCD screen on the video conferencing phone is shown as
below:
- Log into the web user interface, check the Mute checkbox.
If video conferencing endpoint is muted, the icon will appear on the local video.
Call Statistics
If voice quality is poor during a call, you can enter the Call Statistics screen to view the current
status of the call to find out why.
Codec, bandwidth, total packet lost and other parameters about presentation are included in
the call statistics. For example, when a delay occurs or the video has a ‘mosaic’ look, you can
view the total packet loss to check whether the packet has been lost.
Call statistics is configurable via the remote control or web user interface.
To view call statistics via the remote control:
1. Press (More soft key) during an active call.
2. Press or to scroll to Call Statistics, and then press to enter the Call Statistics
screen.
To Next Page
Loading...
