Yealink VC110 User Manual

Getting Started
27
Getting Started
This chapter provides the following basic installation instructions and information for achieving
the best performance from your VC110 video conferencing endpoint. Topics include:
 Endpoint Connection and Installation
 Powering the Endpoint On or Off
 Setup Wizard
 Registration
 Idle Screen Display
 Navigating Menus on the Display Device
 Keyboard Input Method
 Entering Data and Editing Fields
 Endpoint Status
If you require additional information, or assistance to help you use your new phone, contact
your system administrator.
Endpoint Connection and Installation
This section introduces the following:
 Connecting the VC110 video conferencing endpoint
 Installing the VC110 video conferencing endpoint
 Installing batteries in the remote control
Note
Up to two display devices can be connected to the VC110 all-in-one unit. Because the display
device is not included in the package, you need to purchase it separately if required. Ensure that
the purchased display device supports HDMI input.
When connecting only one display device to the VC110 all-in-one unit, Display1 port is the only
available port. If dual screen mode is required, you can connect another display device to the
Display2 port.
Because DVI cable is tailor-made, please use the Yealink-supplied DVI cable.
To prevent shock, do not connect the power adapter and turn on the power before connecting
all endpoint components.

Yealink VC110 Specifications

General

Digital zoom	4 x
Focus adjustment	Auto
Video codecs	H.264, H.263
Maximum frame rate	30 fps
Supported video modes	720p, 1080p
Video formats supported	H.263, H.264
Supported graphics resolutions	352 x 288, 704 x 576, 1280 x 720 (HD 720), 1920 x 1080 (HD 1080)
Voice codecs	G.711a, G.722, G.722.1, G.722.1C
Line-in	Yes
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Pan range	-100 - 100 °
Tilt angle range	-30 - 30 °
Security algorithms	128-bit AES, HTTPS, SRTP, SSL/TLS
Ethernet LAN data rates	10, 100 Mbit/s
Supported network protocols	TCP/IP (IPv4), DHCP/ stastic IP, HTTP/ HTTPS, SRTP/TLS, IEEE802.1X, LLDP-MED, VLAN
Current	2 A
Power consumption (max)	30 W
Power consumption (typical)	24 W
Storage temperature (T-T)	-20 - 50 °C
Operating temperature (T-T)	10 - 40 °C
Operating relative humidity (H-H)	10 - 95 %

Weight and Dimensions

Depth	151.5 mm
Width	234.6 mm
Height	161 mm
Package depth	318 mm
Package width	432 mm
Package height	274 mm
Package weight	5900 g