User Guide for Yealink VC110 Video Conferencing Endpoint
82
video sound, you can select this option.
6. Press (Save soft key) to accept the change.
Audio input device is configurable via the web user interface at the path Setting->Video &
Audio->Audio Input.
Far-end Camera Control
Local video is displayed on the display device of the far site during a call. For the best view, you
can enable the Far Control of Near Camera feature to allow the far site to control the focus and
angle of the local camera. You can also specify whether the far site is allowed to store and use
the local camera presets.
You can configure the far-end camera control feature via the remote control or web user
interface.
Far-end camera control features you need to know:
Far Control of Near Camera
Enables or disables the far-end to control the local camera.
Far Set of Near Camera
Presets
Enables or disables the far-end to store the local camera
presets.
Far Move to Near Camera
Presets
Enables or disables the far-end to use the local camera
presets.
Note
If the remote endpoint enables the far-end camera control feature, you can control the remote
camera. For more information, refer to Controlling the Camera on page 103.
To Next Page
Loading...
