Customizing the VC110 Video Conferencing Endpoint
83
To configure Far-end Camera Control via the remote control:
1. Press (Menu soft key) to enter main menu.
2. Press or to select the Video & Audio menu.
3. Press or to scroll to Far-end Camera Control, and then press .
4. Press or to scroll to Far Control of Near Camera, and then press to enable or
disable this feature.
5. Press or to scroll to Far Set of Near Camera Presets, and then press to enable
or disable this feature.
6. Press or to scroll to Far Move to Near Camera Presets, and then press to
enable or disable this feature.
7. Press (Save soft key) to accept the change.
Far-end Camera Control is configurable via the web user interface at the path Setting->Video
& Audio->Far Control Near Camera/Far Set of Camera Presets/Far Move to Camera
Presets
To Next Page
Loading...
