Yealink VC110 - Hiding Icons in a Call

Customizing the VC110 Video Conferencing Endpoint
59
The current receiver volume of the endpoint is displayed on the left of the display device.
- Press on the video conferencing phone to adjust the receiver volume.
The LCD screen of the video conferencing phone displays the current receiver volume.
The display device will display the receiver volume simultaneously.
Note
Hiding Icons in a Call
During a call, the endpoint will display some information and icons (such as call time, mute icon
and recording icon) by default, you can know the call status from these information and icons.
You can also hide these icons as needed to achieve the best video effects. Hiding icons in a call
feature is configurable via web user interface only.
To enable the hiding icons in a call feature via web user interface:
1. Click on Setting->General.
2. Select the desired values from the pull-down lists of Time Icon, Mute Icon ( ),
Camera Icon ( ), Recording Icon ( ), Sitename Icon, Hold Icon ( ),
Encrypt Icon ( ), OutPut Mute Icon ( ), and Gazeat Icon ( ).
If the video conferencing phone is not the active audio device of the endpoint, you can still use it
to adjust the endpoint volume.