User Guide for Yealink VC110 Video Conferencing Endpoint
102
bar).
Primary display device Secondary display device
When the endpoint is during a call and does not start a presentation.
In the primary display device, the remote video image is shown in full size.
In the secondary display device, the local video image is shown in full size.
Primary display device Secondary display device
When the endpoint is during a call and starts a presentation.
In the primary display device, the remote video image is shown in big size, local video
image along the right side of the screen is shown in small size.
In the secondary display device, the presentation is shown in full size.
Primary display device Secondary display device
You can specify the display content on the secondary display device via the remote control.
To specify the display content on the secondary display device via the remote control:
1. Press the More soft key during an active call.
2. Select Focus (Display2), and then press .
3. Press or to select the desired content, and then press .
The secondary display device displays the selected content. The icon is displayed on
the focus content.
After reassigning the display content on the secondary display device, the presentation will
automatically be displayed on the primary display device.
To Next Page
Loading...
