Yealink VC110 - Page 31

Overview
17
Hardware components of the remote control:
Item
Description
①
Sleep Key
Puts the endpoint to sleep or wakes the endpoint up.
②
Red Shortcut Key
Located at the bottom left of the screen. Label automatically
identifies context-sensitive features.
In the idle screen, this is used to enter the main menu screen
and corresponds to the Menu soft key.
③
Yellow Shortcut Key
Located at the bottom center of the screen. Label automatically
identifies context-sensitive features.
In the idle screen, this is used to enter the pre-dialing screen,
and corresponds to the Call soft key.
④
Blue Shortcut Key
Located at the bottom right of the screen. Label identifies
context-sensitive features.
In the idle screen, this is used to save and check the camera
preset position, and corresponds to the Preset soft key.
⑤
Vol+
Increases the endpoint volume.
⑥
Vol-
Decreases the endpoint volume.
⑦
Zoom out Key
 Decreases the camera zoom or the captured image
magnifications.
 Behaves as page down in a multiple page list.
⑧
Zoom in Key
 Increases the camera zoom or the captured image
magnifications.
 Behaves as page up in a multiple page list.
⑨
OK Key
Confirms actions or answers incoming calls.
⑩
Navigation Key
 In the menu screen, press or to change menus,
press or to select items.
 In the idle screen, pan and tilt the camera to adjust the
viewing angle.
⑪
Mute Key
Toggles the mute feature.
⑫
Home Key
 Returns to the idle screen when in the menu screen.
 Enters the pre-dialing screen during a call.
⑬
Video Source Key
Switches the input source between Camera, Camera-PC, or PC.
⑭
Off-hook Key
 Enters the pre-dialing screen.