Using the VCM60 Video Conferencing Wireless Microphone
127
The display device prompts “Dongle connected!”, and the (unregistered) icon
appears on the status bar.
2. Turn on the VCM60.
The VCM60 registers with the dongle automatically. If successful, the (unregistered)
icon will change to (registered). Currently capacity appears on the right side of the
icon. When the last idle time is less than 1 hour, please charge the VCM60. For more
information, refer to Charging the VCM60 on page 132.
To remove the VCM60 from the VC110 video conferencing endpoint, do the following:
1. Remove the dongle from the VC110 all-in-one unit.
To Next Page
Loading...
