User Guide for Yealink VC110 Video Conferencing Endpoint
36
The default administrator password is “0000”.
Note
8. Press (Next soft key) to continue or press (Previous soft key) to return to the
previous screen.
The display device shows firewall port mapping information.
9. Press (Next soft key) to continue or press (Previous soft key) to return to the
Do remember the new administrator password or keep a copy of the password in a safe place. If
you forget the password, you will need to reset the endpoint to the factory settings, and then
reset the password or use the default password ”0000”.
To Next Page
Loading...
