YOKOGAWA CA150 User Manual

Memory Function
6-1
IM CA150E
1
2
3
4
5
6
7
8
9
10
11
12
App
6. Memory Function
Two types of information are saved to memory: data memory items and setting
memory items. (Data memory items and setting memory items are saved to
separate memory areas.)
Data Memory Items
Information such as records of source values and measurement values and
program sweep output data can be stored.
Press the SAVE key to save data and the LOAD key to display
(conrm) data.
Number of storable items: 100 (No. 0 to No. 99)
Stored items: Save date and time
Source FUNCTION, RANGE, and source values
When PULSE is selected with FUNCTION:
Frequency, amplitude, and pulse number
Measurement MEASURE ON/OFF, FUNCTION, RANGE,
and measurement values
Setting mode Contact input and temperature scale
standard
Setting Memory Items
Conditions that have been previously saved in setting mode can be
reproduced.Press the SAVE + ENTER keys to save data and the LOAD +
ENTER key to load data.
Number of storable items: 21 (No. 0 to No. 20)
No. 0 becomes the initial setting (default value) at power on.
Stored items: Save date and time
Source FUNCTION, RANGE, and source values
When PULSE is selected with FUNCTION:
Frequency, amplitude, and pulse number
Measurement MEASURE ON/OFF, FUNCTION, RANGE,
and measurement values
Setting mode Source: Interval and built-in RJ sensor
Measurement: Averaging and contact input
Common: Auto power off, communication,
and temperature scale standard
Tip
The following items cannot be saved:
SOURCE ON/OFF state, 24V LOOP ON/OFF state, divided output (n/m) state
(n and m setting values), sweep output state (setting), backlight on/off state,
NiMH battery charge state

YOKOGAWA CA150 Specifications

General

Brand	YOKOGAWA
Model	CA150
Category	Test Equipment
Language	English