YOKOGAWA CA150 - Loading

Memory Function
6-9
IM CA150E
1
2
3
4
5
6
7
8
9
10
11
12
App
6.2.4 Loading
Loading
1 Simultaneously press the LOAD and ENTER keys. (Load mode)
MEM No. (memory number) and LOAD appear.
2 LOAD/SETUP appears.
3 Use the ▲ ▼
key to select a memory number.
If no data exists (empty) for the memory number, "-----" appears.
4 The saved data (settings) appears.
5 Press the ENTER key.
6 The setting conditions are reproduced (state is reected) and
the instrument returns to normal (source/measurement) mode.
Clearing Saved Data
1 Simultaneously press the LOAD and ENTER keys. (Load mode)
MEM No. (memory number) and LOAD appear.
2 SETUP appears.
3 Use the ▲ ▼
key to select a memory number.
4 The saved data (settings) appears.
5 Press the CLEAR key.
6 The clear conrmation indication appears.
7 Press the ENTER key to clear the data.
The indication changes to "-----."
(To not clear the data, press the LOAD key to cancel the operation.)
For details, refer to "6.1.3 Clearing."
Tip
To return to normal (source/measurement) mode from load mode,
press the LOAD key again while MEM No. (memory number) and
LOAD are displayed.
6.2 Setting Memory Items