7-2
IM CA150E
7.1 Source
7.1 Source
(1) Interval Time
This sets the interval time for step sweep and program sweep,
as well as the sweep time for linear sweep.
(These items cannot be set individually.)
Linear Sweep
16 seconds
32 seconds
Interval Time
5 seconds
10 seconds
Selection
FAST
SLOW
For details, refer to "4.9.1 Step Sweep Function," "4.9.2 Linear Sweep
Function," and "4.9.3 Program Sweep Function."
(2) Built-in RJ Sensor
This turns on or off the RJ sensor built into the instrument.
For details, refer to "4.5.3 Using the Built-in RJ Sensor."
(3) Calibration (Source)
This is a calibration mode for adjusting (calibrating) source.
For details, refer to "9. Calibration Mode."
To Next Page
Loading...
Need help?
General
