8-4
IM CA150E
8.3 Detailed Description of Commands
Setting and Control
Command: Send command syntax
Answer: Return data syntax of command (setting, control) with
no response.
When an error occurs, the same data as that of the error
message ERRm (m = error number) displayed on
the LCD is returned.
Query
Command: Send command syntax
Return: Return data syntax of command (query) with response.
Operating Condition by Mode
Normal: The command can be used during normal measurement/
source operation.
Setting: The command can be used in setting mode (Chapter 7) or
calibration mode (Chapter 9).
For details on whether each command can be used in other modes, refer to
"8.5 Table of Valid Communication Commands."
8.3 Detailed Description of Commands
To Next Page
Loading...
Need help?
General
