YOKOGAWA CA150 User Manual

6-8
IM CA150E
6.2 Setting Memory Items
6.2.3 Clearing Memory
Follow the procedure below to clear (delete) saved data.
Clearing Selected Memory Number
1 Simultaneously press the SAVE and ENTER keys.
(Setting memory mode)
MEM No. (memory number) appears.
2 Use the ▲ ▼ key to select a memory number.
3 Press the CLEAR key.
4 The clear conrmation indication appears.
5 Press the ENTER key to clear the data.
(To not replace the data, press the SAVE key to cancel the operation.)
Clear confirmation indication
Clearing All Memory Numbers
1 Simultaneously press the SAVE and ENTER keys.
(Setting memory mode)
MEM No. (memory number) appears.
2 Use the ▲ ▼
key to select a memory number.
3 Press the CLEAR key.
4 Press the CLEAR key again.
5 The clear all conrmation indication appears.
6 Press the ENTER key to clear MEM No. 1 to No. 20.
(No. 0 is not cleared.)
(To not clear the data, press the SAVE or CLEAR key to cancel
the operation.)
Clear confirmation indication
Tip
• If the data of No. 0 is cleared, the data is replaced with the setting conditions
(initial settings) at the time of shipment.
• To return to normal (source/measurement) mode from setting memory mode,
press the SAVE key again while MEM No. (memory number) is displayed.

YOKOGAWA CA150 Specifications

General

Brand	YOKOGAWA
Model	CA150
Category	Test Equipment
Language	English