YOKOGAWA CA150 User Manual

Memory Function
6-3
IM CA150E
1
2
3
4
5
6
7
8
9
10
11
12
App
6.1.1 Saving
1 Press the SAVE key when a source value or measurement value is
displayed.
MEM No. (memory number) appears.
The next number after the largest used (saved) number appears.
2 Use the ▲ ▼ key to change the memory number.
3 Press the ENTER key. The data is saved and save mode is canceled.
(To not save the data, press the SAVE key to cancel save mode.)
Tip
To conrm saved data, press the LOAD key.
After pressing the LOAD key, use the ▲▼
key to select the memory number
to conrm. The save date and time appear and then the data appears.
6.1.2 Replacing and Saving
Follow the procedure below to replace saved data (a memory number).
1 Press the SAVE key. (Save mode)
MEM No. (memory number) appears.
2 Use the ▲ ▼ key to select a memory number.
3 Press the ENTER key. If data exists for the memory number,
a replace conrmation indication appears.
4 Press the ENTER key again to replace the data.
The instrument returns to normal (source/measurement) mode.
(To not replace the data, press the SAVE key to cancel the operation.)
Replace confirmation indication
6.1 Data Memory Items

YOKOGAWA CA150 Specifications

General

Brand	YOKOGAWA
Model	CA150
Category	Test Equipment
Language	English