YOKOGAWA UM33A - Page 44

5-3
IM 05P03D21-01EN
Quick Setting Function
5
SettingExample
Set the following parameters to set to thermocouple Type K (range: 0.0 to 500.0ºC). No
need to change the parameters other than the following parameters.
Set QSM = YES to enter the quick setting mode.
(1) Set IN = K1.
(2) Set UNIT = C (initial value).
(3) Set RH = 500.0
(4) Set RL = 0.0.
SetEXIT=YEStoquitthequicksettingmode.
The Operation Display is shown.
5.1SettingUsingQuickSettingFunction