YOKOGAWA UM33A - 11.2 Setting Contact Output Function

11-4
IM 05P03D21-01EN
11.2 SettingContactOutputFunction
11.2.1 SettingFunctionofContactOutput
Description
The contact output function works by setting a status such as an alarm to the contact
output.
This explanation assumes that the contact type is energized. (The contact is turned on
when an event occurs.)
SettingDetails
ContactOutputEquippedasStandard
Parameter
symbol
Name
Display
level
Settingrange Menusymbol
AL1.S AL1 function selection STD
See the following section. ALM
AL2.S AL2 function selection STD
AL3.S AL3 function selection STD
AdditionalRelayContactOutput
Parameter
symbol
Name
Display
level
Settingrange Menusymbol
AL4.S AL4 function selection STD See the following section. ALM
Additional Contact Output
Parameter
symbol
Name
Display
level
Settingrange Menusymbol
DO1.S DO11 function selection STD
See the following section. DO
DO2.S DO12 function selection STD
DO3.S DO13 function selection STD
DO4.S DO14 function selection STD
DO5.S DO15 function selection STD
Refer to the table below for presence/absence of UM33A contact output.
Terminal area
Sufxcode:Type2
0 1 2 3
ALM4 (101-103) – AL4 AL4 AL4
E1-terminal area – – – DO11 to DO15
► Terminal arrangement: 16.4 Wiring