YOKOGAWA UM33A User Manual

17-6
IM 05P03D21-01EN
17.2 ListofParameters
17.2.1 Operation Parameters
AlarmSetpointSettingMenu(Menu:AL)
Parameter
symbol
Name
Display
level
Settingrange Initial value
A1 to A4
Alarm-1 to -4
setpoint
EASY
Set a display value of setpoint of
PV alarm or velocity alarm.
-19999 to 30000 (Set a value
within the input range.)
Decimal point position depends on
the input type.
0
AlarmFunctionSettingMenu(Menu:ALRM)
Parameter
symbol
Name
Display
level
Settingrange Initial value
AL1 to AL8 Alarm-1 to -8 type EASY
Set a 5-digit value in the following
order.
[Latch action (0/1/2/3/4)] +
[Energized (0) or De-energized (1)]
+ [Without (0) or With (1) Stand-by
action] + [Alarm type: 2 digits (see
below)]
For latch action, see chapter 9.
Alarm type: 2 digits
00: Disable
01: PV high limit
02: PV low limit
29: PV velocity
30: Fault diagnosis
31: FAIL
AL1, AL3, AL5,
AL7:
Latch action
(0)
Energized (0)
Without Stand-
by action (0)
PV high limit
(01)
AL2, AL4, AL6,
AL8:
Latch action
(0)
Energized (0)
Without Stand-
by action (0)
PV low limit
(02)
VT1 to VT8
PV velocity alarm
time setpoint 1 to 8
EASY 0.01 to 99.59 (minute.second) 1.00
HY1toHY8
Alarm-1 to -8
hysteresis
EASY
Set a display value of setpoint of
hysteresis.
-19999 to 30000 (Set a value
within the input range.)
Decimal point position depends on
the input type.
When the decimal point position
for the input type is set to "1", the
initial value of the hysteresis is
"1.0".
10
DYN1to
DYN8
Alarm-1 to -8 On-
delay timer
STD
0.00 to 99.59 (minute.second)
0.00
DYF1to
DYF8
Alarm-1 to -8 Off-
delay timer
PRO 0.00

YOKOGAWA UM33A Specifications

General

Brand	YOKOGAWA
Model	UM33A
Category	Touch Panel
Language	English