YSI 2900 series - Date and Time Settings

31
3.3 Changing the Date and Time Settings
The date and time settings can only be changed while the Multi-Channel Online
Monitor System is in Idle mode. To place the system in Idle mode, see Section 4.6.5
Stopping the Monitor System.
In order to ensure that the YSI 2900 Series data will be displayed in the Multi-Channel Online Monitor
data tab, the date displayed on the YSI 2900 Series Analyzer must match the date shown in the
Multi-Channel Online Monitor software application. If necessary, change the YSI 2900 Series date by
touching the time displayed on the main screen. Refer to the YSI 2900 Series Biochemistry Analyzers
Operations and Maintenance Manual for changing the YSI 2900 Series date.
1. Select the Date/Time tab.
2. Enter the Month, Day, and Year. Most fields use a dropdown menu to select the field value.
3. Enter the Hour, Minute and Second. Select either AM or PM.
4. Select Change Date/Time button to confirm the changes.
5. Pressing Reset will change the date and time back to their original settings.
Figure 3-6