YSI 2900 series - Top Panel Components; Flownamics In situ Sampling Probe (FISP)

6
1.6.3 Multi-Channel Online Monitor – Top Panel
The top panel serves as the communication interface for the Analog Output (DAC) connections.
Figure 1-5
The Multi-Channel Online Monitor must be powered off prior to connecting or disconnecting any cables
from the top or rear communication panels. Connecting or disconnecting cables with the power on may
cause software and/or communication errors with the Multi-Channel Online Monitor and YSI 2900 Series
Analyzer.
1.6.4 Flownamics In situ Sampling Probe (FISP
®
)
FISP sampling probes are used to obtain cell-free samples as well as provide a vessel sampling interface for the Multi-
Channel Online Monitor. These probes are sold separately. The FISP probes provide direct transfer of the vessel contents
as well provide a sterile barrier for the vessel. The sterile barrier is obtained through the use of a sterilized 0.2 um ceramic
membrane mounted onto the FISP housing (Figure 1-6 & Figure 1-7). Refer to the FISP Sampling Probe User’s Guide for
additional details.
There are two basic types of FISP sampling probes, which are the D-Series and the F-Series sampling probes.
2940: Eight 0-5 V Analog Outputs
(2 outputs/connection)
2980: Sixteen 0-5 V Analog Outputs
(2 outputs/connection)