64
4. Choose OK to restore the backup file. Within 2–3 minutes, a confirmation message will appear stating that
the restoration was successful.
4.11.3 Removing a Backup File
1. Select the Update icon.
2. Scroll through the Backup file list to find the file that you would like to have removed.
3. Click Remove next to the desired file name. A message will appear asking to confirm file removal.
4. Choose OK to remove the backup file. Within 60 seconds, a confirmation message will appear stating that the
removal was successful.
4.12 Shutting Down, Logging Out or Restarting
Before powering off the Multi-Channel Online Monitor, the software needs to be shutdown. If the user needs to
logout or restart the Multi-Channel Online Monitor, these functions are covered here as well.
1. After stopping all system functions, click the Logout button located at the top right hand corner of the screen.
The Logout window will appear as shown below.
Figure 4-20
2. The user has the option to logout, restart or shutdown the Multi-Channel Online Monitor System.
The factory default backup file cannot be removed. This ensures a backup file will always be
available.
To Next Page
Loading...
