YSI 2900 series - Page 13

7
1.6.4.1 D-Series – FISP Cell-Free Sampling Probe
The D-Series probes are used for Steam-in-Place (SIP) or autoclaveable stainless steel vessels which have a 25 mm
Ingold port in the vessel wall. Additionally, the D-series probes can be fitted for both standard (40 mm) and safety port (52
mm) depths. The Luer configuration is designed for use with the Multi-Channel Online Monitor system (Figure 1-6).
Figure 1-6
O-Ring, EPDM
Membrane
O-Rings, EPDM
End Cap Screw, 316-SS
2 Way Plug Valve, 316-SS
Probe Body
25 mm D-Series Safety
Sampling Probe
25 mm Retaining Nut
1” External Retaining Ring,
316-SS (Not shown)
PEEK female luer
connector
SS ¼” Tubing Adapter and
PEEK Female Luer to 10-32
Male Fitting