Printer Configuration and Adjustment
Changing Printer Settings
86
P1051584-002 8/23/12
Load Defaults Load Printer or Print Server Defaults
• FACTORY—Restores all printer settings other than the network settings back to the
factory defaults. Use care when loading defaults because you will need to reload all
settings that you changed manually.
• NETWORK—Reinitializes the printer’s wired or wireless print server. With a
wireless print server, the printer will also reassociate with your wireless network.
• LAST SAVED—Loads settings from the last permanent save.
Accepted values:
• FACTORY
• NETWORK
• LAST SAVED
Related ZPL command(s):
Factory: ^JUF
Network: ^JUN
Last saved: ^JUR
SGD command used:
none
Control panel menu item:
Available as options when exiting Setup Mode. See
Exit Setup Mode on page 19.
Control panel key(s):
Factory: Hold FEED + PAUSE during printer
power-up to reset the printer parameters to factory
values.
Network: Hold CANCEL + PAUSE during printer
power-up to reset the network parameters to factory
values.
Last saved: N/A
Printer web page:
Factory: View and Modify Printer Settings >
Restore Default Configuration
Network: Print Server Settings > Reset Print
Server
Last saved: View and Modify Printer Settings >
Restore Saved Configuration
Table 7 • Maintenance and Diagnostic Tools (Continued)
To Next Page
Loading...
Need help?
General
Weight and Dimensions
