ZKTeco SpeedFace-V3L User Manual

SpeedFace-V3L User Manual
Page | 98 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
belong to five different access groups.
Tap Combined Verification on the Access Control interface to configure the
combined verification setting.
On the combined verification interface, tap the Door-unlock combination to be
set, and tap the up and down arrows to input the combination number, and
then press OK.
For Example:
 If the Door-unlock combination 1 is set as (01 03 05 06 08). It indicates
that the unlock combination 1 consists of 5 people and all the 5
individuals are from 5 groups, namely, AC Group 1, AC Group 3, AC Group
5, AC Group 6, and AC Group 8, respectively.
 If the Door-unlock combination 2 is set as (02 02 04 04 07). It indicates
that the unlock combination 2 consists of 5 people; the first two are from
AC Group 2, the next two are from AC Group 4, and the last person is from
AC Group 7.
 If the Door-unlock combination 3 is set as (09 09 09 09 09). It indicates

ZKTeco SpeedFace-V3L Specifications

General

Display type	LCD
Screen shape	Flat
Built-in display	Yes
Display diagonal	2.4 \
Display size (HxV)	240 x 320 mm
Internal memory	256 GB
Processor cores	2
Internal storage capacity	512 GB
Operating system installed	Linux
Type	Face recognition terminal
Access code reader	-
Authentication type	Biometric, Face recognition
Access chip/card reader	No
Face recognition distance	0.5 - 2 m
False Rejection Rate (FRR)	0.02 %
False Acceptance Rate (FAR)	0.01 %
International Protection (IP) code	IP65
Operating temperature (T-T)	-5 - 45 °C
Total megapixels	1 MP
RS-485 ports	1
Package weight	800 g

Weight and Dimensions

Depth	58.5 mm
Width	185 mm
Height	20 mm
Weight	300 g