Zoom F6 - Page 97

97
4. Use and to select
Input Link, and press
.
■ Setting stereo links
Stereo
Use and to select Stereo, and
press
.
MS
Use and to select MS, and
press
.
Setting Explanation
Stereo When stereo-linked, inputs are handled normally.
MS
When stereo-linked, signals from mid-side mics are converted to
ordinary stereo.
NOTE
•
• When stereo-linked, odd tracks are handled as left and even tracks as
right channels.
•
• When MS stereo-linked, odd tracks are handled as mid signals and even
tracks as side signals.
HINT
When MS stereo-linked, the method to balance mid and side is according
to the recording mode as follows.
•
•
Float (32bit): Use
for each track to adjust the mid/side balance.
•
• Not Float (32bit): Use the input level for each track to adjust the mid/side
balance. (See “Adjusting input levels →•P.25.)