Chapter 31 Configuration: Management
GS1900 Series User’s Guide
213
Port Select a value in Available and click the Add (>) icon to transfer to the Acting column.
Select a value in Acting and click the Remove (<) icon to transfer to the Available column.
Source Select the source IP value. The options are ALL or IPv4/Wildcard.
IPv4/Wildcard Select and enter the IPv4/Wildcard source.
Service Select the service to use for remote access. The values are ALL, HTTP, HTTPS, or SNMP.
Apply Click Apply to save the changes.
Cancel Click Cancel to discard the changes.
Table 175 Configuration > Management > Remote Access Control > Profile > Add/Modify
LABEL DESCRIPTION
To Next Page
Loading...
