Chapter 4 Tutorials
HES-309M Series User’s Guide
41
In the following figure, router R is connected to the WiMAX Device’s LAN. R
connects to two networks, N1 (192.168.1.x/24) and N2 (192.168.10.x/24). If
you want to send traffic from computer A (in N1 network) to computer B (in N2
network), the traffic is sent to the WiMAX Device’s WAN default gateway by
default. In this case, computer B will never receive the traffic.
You need to specify a static routing rule on the WiMAX Device to specify R as the
router in charge of forwarding traffic to N2. In this case, the WiMAX Device routes
traffic from computer A to R and then R routes the traffic to computer B.
N2
B
A
R
N1
N2
B
N1
A
R
To Next Page
Loading...
