Chapter 4 Tutorials
HES-309M Series User’s Guide
42
This tutorial uses the following example IP settings:
To configure a static route to route traffic from N1 to N2:
1 Click Network Setting > Route > Static Route.
2 Click Add to create a new route.
3 Configure the Edit Static Route screen using the following settings:
3a Enter 192.168.10.0 and subnet mask 255.255.255.0 for the destination,
N2.
3b Enter 192.168.1.253 (R’s IP address on N1) in the IP Address field under
Next Hop.
3a Click Save.
Now computer B should be able to receive traffic from computer A. You may need
to additionally configure R’s firewall settings to accept specific traffic to pass
through.
Table 8 IP Settings in this Tutorial
DEVICE / COMPUTER IP ADDRESS
The WiMAX Device’s WAN 172.16.1.1
The WiMAX Device’s LAN 192.168.1.1
A 192.168.1.34
R’s IP address on N1 192.168.1.253
R’s IP address on N2 192.168.10.2
B 192.168.10.33
To Next Page
Loading...
