Chapter 3 The Web Configurator
NXC Series User’s Guide
40
3.3.2.3 Configuration Menu
Use the configuration menu screens to configure the NXC’s features.
IP/MAC Binding IP/MAC Binding List the devices that have received an IP address from NXC interfaces
using IP/MAC binding.
Login Users Login Users List the users currently logged into the NXC.
Dynamic Guest List the dynamic guest accounts in the NXC’s local database.
Trusted MAC
Address List
List the MAC addresses that are authenticated and allowed to access
the network.
USB Storage Storage
Information
Display details about a USB device connected to the NXC.
Ethernet Neighbor Ethernet
Neighbor
Display the NXC’s neighboring devices in one place.
Wireless
AP Information AP List Display information about the connected APs.
Radio List Display information about the radios of the connected APs.
ZyMesh ZyMesh Link Info Display statistics about the ZyMesh connections between the
managed APs.
SSID Info SSID Info Display information about the SSID’s wireless clients.
Station Info Station List Display information about the connected stations.
Detected Device Detected
Device
Display information about suspected rogue APs.
Log View Log List log entries for the NXC.
View AP Log Allow you to query connected APs and view log entries for them.
Table 13 Monitor Menu Screens Summary (continued)
FOLDER OR LINK TAB FUNCTION
Table 14 Configuration Menu Screens Summary
FOLDER OR LINK TAB FUNCTION
Licensing
Registration Registration Register the device.
Service View the licensed service status and upgrade licensed services.
Wireless
Controller Configuration Configure how the NXC handles APs that newly connect to the
network.
AP
Management
Mgmt. AP List Edit wireless AP information, remove APs, and reboot them.
AP Policy Configure the AP controller’s IP address on the managed APs and
determine the action the managed APs take if the current AP
controller fails.
AP Group Configure AP groups, which define the radio, port, VLAN and load
balancing settings and apply the settings to all APs in the group.
Firmware Have the NXC check and download the latest AP firmware from the
firmware server.
Rogue AP Rogue/Friendly AP
List
Configure how the NXC monitors for rogue APs.
Auto Healing Auto Healing Enable auto healing to extend the wireless service coverage area of
the managed APs when one of the APs fails.
Network
To Next Page
Loading...
