Chapter 3 The Web Configurator
NXC Series User’s Guide
41
Interface Ethernet Manage Ethernet interfaces and virtual Ethernet interfaces.
VLAN Create and manage VLAN interfaces and virtual VLAN interfaces.
LAG Combine multiple physical Ethernet interfaces into a single logical
interface.
Routing Policy Route Create and manage routing policies.
Static Route Create and manage IP static routing information.
Zone Zone Configure zones used to define various policies.
NAT NAT Set up and manage port forwarding rules.
ALG ALG Configure FTP pass-through settings.
IP/MAC Binding Summary Configure IP to MAC address bindings for devices connected to
each supported interface.
Exempt List Configure ranges of IP addresses to which the NXC does not apply IP/
MAC binding.
Captive Portal Captive Portal Enable captive portal and specify the captive portal page that
displays when a client makes an initial network connection.
Custom Captive
Portal
Create a customized login theme or upload one.
Redirect on
Controller
Allow clients to authenticate themselves to the NXC with a QR code,
and configure the authentication policy rules for the NXC.
Redirect on AP Configure the authentication policy rules for the managed APs.
RTLS Real Time Location
System
Use the managed APs as part of an Ekahau RTLS to track the location
of Ekahau WiFi tags.
Firewall Firewall Enable or disable the firewall and asymmetrical routes, and configure
firewall rules.
Session Control Limit the number of concurrent NAT/firewall sessions a client can use.
Object
User/Group User Create and manage users.
Group Create and manage groups of users.
Setting Manage default settings for all users, general settings for user sessions,
and rules to force user authentication.
MAC Address Map wireless client MAC addresses to MAC roles (MAC address user
accounts).
AP Profile Radio Create and manage wireless radio settings files that can be
associated with different APs.
SSID Create and manage wireless SSID, security, MAC filtering and Layer-2
isolation settings files that can be associated with different APs.
MON Profile MON Profile Create and manage rogue AP monitoring files that can be
associated with different APs.
ZyMesh Profile ZyMesh Profile Create and manage ZyMesh files that can be associated with
different APs.
Address Address Create and manage host, range, and network (subnet) addresses.
Address Group Create and manage groups of addresses.
Service Service Create and manage TCP and UDP services.
Service Group Create and manage groups of services.
Schedule Schedule Create one-time and recurring schedules.
Table 14 Configuration Menu Screens Summary (continued)
FOLDER OR LINK TAB FUNCTION
To Next Page
Loading...
