Chapter 5 LAN Setup
Basic Home Station VDSL2 P8701T User’s Guide
105
Figure 33 LAN Setup
The following table describes the fields in this screen.
Table 28 LAN Setup
LABEL DESCRIPTION
IP Address Enter the LAN IP address to assign to your VDSL Router in dotted decimal notation,
for example, 192.168.1.1 (factory default).
Subnet Mask Type the subnet mask of your network in dotted decimal notation, for example
255.255.255.0 (factory default). Your VDSL Router automatically computes the
subnet mask based on the IP Address you enter, so do not change this field unless
you are instructed to do so.
To Next Page
Loading...
Need help?
General
