ZyXEL Communications P8701T User Manual

Chapter 4 WAN
Basic Home Station VDSL2 P8701T User’s Guide
83
4.4.1 WAN Connection Configuration
Click the Edit or Add button in the WAN Service screen to configure a WAN connection.
4.4.1.1 WAN Interface
This screen displays when you add a new WAN connection.
Figure 21 WAN Configuration: WAN Interface
The following table describes the labels in this screen.
4.4.1.2 Service Type
If you set the DSL link type to PPPoA or IPoA for the ATM interface and configure a WAN
connection using the ATM interface, you only need to configure the Enter Service Description
field in this screen.
Table 18 WAN Configuration: WAN Interface
LABEL DESCRIPTION
Select a layer 2
interface for this
service
Select ptmx to use the DSL port as the WAN port and use the VDSL
technology for data transmission.
Select atmx or ipoax (where x starts from 0 and is the index number of ATM
layer-2 interfaces using different VPI and/or VCI values) to use the DSL port as
the WAN port and use the ADSL technology for data transmission.
Back Click this button to return to the previous screen.
Next Click this button to continue.

ZyXEL Communications P8701T Specifications

General

Brand	ZyXEL Communications
Model	P8701T
Category	Network Router
Language	English