Chapter 1 Introducing the VDSL Router
Basic Home Station VDSL2 P8701T User’s Guide
16
Figure 2 Wireless Access Example
1.6.1 Using the Wifi/WPS Button
Note: The wireless client must be a WPS-aware device (for example, a WPS USB adapter or
PCMCIA card), which can be identified by the WPS logo
:
If the wireless network is turned off, press the Wifi/WPS button at the back of the VDSL Router for
one second. Once the Wifi LED turns green, the wireless network is active.
You can also use the Wifi button to quickly set up a secure wireless connection between the VDSL
Router and a WPS-compatible client by adding one device at a time.
To activate WPS:
1 Make sure the POWER LED is green and not blinking.
2 Press the Wifi/WPS button for ten seconds and release it.
Wi/WPS
To Next Page
Loading...
Need help?
General
