Chapter 3 Device Info Screens
Basic Home Station VDSL2 P8701T User’s Guide
66
Figure 8 WAN Statistics Screen
Each field is described in the following table.
3.7 The xTM Statistics Screen
Log into the VDSL Router’s web configurator and click Wireless network > Classic configuration
> Device Info > Statistics > xTM to display ATM or PTM connection information.
Table 6 WAN Statistics Screen
LABEL DESCRIPTION
Interface This shows the name of the WAN interface used by this connection.
The default name ipoa*, pppoa*, atm* or ptm* indicates the DSL port. ppp* indicates a
PPP connection via any one of the WAN interfaces. ppp3G0 indicates a PPP connection
through the 3G interface.
The number after the dot (.) represents the VLAN ID number assigned to traffic sent
through this connection. The number after the underscore (_) represents the index number
of connections through the same interface.
(null) means the entry is not valid.
Description This shows the descriptive name of this connection.
ATM interfaces include the VPI and VCI. 0 and 35 or 0 and 1 are the default VPI and VCI
numbers. The last number represents the index number of connections over the same PVC
or the VLAN ID number assigned to traffic sent through this connection.
(null) means the entry is not valid.
Received
Bytes This indicates the number of bytes received on this interface.
Pkts This indicates the number of packets received on this interface.
Errs This indicates the number of frames with errors received on this interface.
Drops This indicates the number of received packets dropped on this interface.
Transmitted
Bytes This indicates the number of bytes transmitted on this interface.
Pkts This indicates the number of transmitted packets on this interface.
Errs This indicates the number of frames with errors transmitted on this interface.
Drops This indicates the number of outgoing packets dropped on this interface.
Reset Statistics Click this to clear the screen’s statistics counters.
To Next Page
Loading...
Need help?
General
