Chapter 9 Routing
Basic Home Station VDSL2 P8701T User’s Guide
138
9.2 The Default Gateway Screen
Click Wireless network > Classic configuration > Advanced Setup > Routing > Default
Gateway to open the Default Gateway screen. Use this screen to select WAN interfaces to serve
as system default gateways.
Figure 51 Default Gateway
Move the WAN interfaces to serve as system default gateways from Available Routed WAN
Interfaces to Selected Default Gateway Interfaces.
Use the Selected WAN Interface field to select the preferred WAN interface to server as the VDSL
Router’s default IPv6 gateway.
Click Apply/Save to save your changes.
9.3 The Static Route Screen
Use this screen to view and configure the static route rules on the VDSL Router. Click Wireless
network > Classic configuration > Advanced Setup > Routing > Static Route to open the
following screen.
To Next Page
Loading...
Need help?
General
