Chapter 4 WAN
Basic Home Station VDSL2 P8701T User’s Guide
95
4.5 The 3G Backup Screen
Use this screen to configure your 3G settings. Click Network > WAN > 3G Backup. See Section
2.3 on page 21 for the supported 3G USB dongles.
Note: The actual data rate you obtain varies depending the 3G card you use, the signal
strength to the service provider’s base station, and so on.
If the signal strength of a 3G network is too low, the 3G card may switch to an available 2.5G or
2.75G network. Refer to Section 4.6 on page 97 for a comparison between 2G, 2.5G, 2.75G and 3G
wireless technologies.
Figure 31 3G Backup
Back Click this button to return to the previous screen.
Apply/Save Click this button to save your changes.
Table 26 WAN Configuration: Configuration Summary
LABEL DESCRIPTION
To Next Page
Loading...
