ZyXEL Communications P8701T User Manual

Chapter 4 WAN
Basic Home Station VDSL2 P8701T User’s Guide
80
The following table describes the fields in this screen.
4.3.1 Layer-2 PTM Interface Configuration
Click the Add button in the Layer2 Interface: PTM screen to open the following screen. Use this
screen to create a new layer-2 interface.
Figure 19 DSL PTM Interface Configuration
Table 15 Layer-2 Interface: PTM
LABEL DESCRIPTION
Interface The name of a configured layer-2 interface.
DSL Latency This displays whether the ATM interface uses interleave delay (Path1) or fast mode with
no interleave delay (Path0).
PTM Priority This does not apply at the time of writing.
Conn Mode This shows the connection mode of the layer-2 interface.
IP QoS This displays whether QoS (Quality of Service) is enabled on the interface.
Remove Select an interface and click the Remove button to delete it. You cannot remove a layer-
2 interface when a WAN service is associated with it.
Add Click this button to create a new ATM layer-2 interface.

ZyXEL Communications P8701T Specifications

General

Brand	ZyXEL Communications
Model	P8701T
Category	Network Router
Language	English