ZyXEL Communications P8701T - The ADSL BER Test Screen; The Route Info Screen

Chapter 3 Device Info Screens
Basic Home Station VDSL2 P8701T User’s Guide
70
3.8.1 The ADSL BER Test Screen
Do the following while the VDSL Router has an ADSL connection to perform a ADSL Bit Error Rate
(BER) test to determine the quality of the ADSL connection.
1 Log into the VDSL Router’s web configurator and click Wireless network > Classic configuration
> Device Info > Statistics > xDSL > xDSL BER Test to display this screen. Select a test
duration and click Start.
2 Click Stop to finish the test.
3 The test results display including the test’s duration, the number of bits transferred, the number of
errored bits, and the ratio of errored bits to transmitted bits.
3.9 The Route Info Screen
Log into the VDSL Router’s web configurator and click Wireless network > Classic configuration
> Device Info > Route to display the VDSL Router’s routing table.