Chapter 15 Diagnostic
Basic Home Station VDSL2 P8701T User’s Guide
200
15.3 Diagnostics
Click Wireless network > Classic configuration > Diagnostics to open the screen shown next.
Use this screen to test the VDSL Router’s connections.
Figure 88 Diagnostics
• Click Next Connection to test the next WAN connection.
• Click Test to perform the test again.
• Click Test With OAM F4 with to perform an OAM (Operation, Administration and Maintenance)
F4 loopback test on an ATM PVC.
Note: The DSLAM to which the VDSL Router is connected must also support OAM F4 to
use the OAM F4 loopback test.
15.4 802.1ag Connectivity Fault Management
Click Wireless network > Classic configuration > Diagnostics > Fault Management to open
the following screen. Use this screen to perform CFM actions.
To Next Page
Loading...
