Chapter 5 LAN Setup
Basic Home Station VDSL2 P8701T User’s Guide
107
Figure 34 Static DHCP: Add/Edit
The following table describes the labels in this screen.
5.3 The IPv6 LAN Auto Configuration Screen
Click Wireless network > Classic configuration > Advanced Setup > LAN >IPv6
Autoconfig to open the IPv6 LAN Auto Configuration screen. Use this screen to set the Local
Area Network interface IPv6 settings.
Table 29 Static DHCP: Add/Edit
LABEL DESCRIPTION
MAC Address Enter the MAC address of a computer on your LAN.
Every Ethernet device has a unique MAC (Media Access Control) address. The MAC
address is assigned at the factory and consists of six pairs of hexadecimal characters, for
example, 00:A0:C5:00:00:02.
IP Address Enter the IP address that you want to assign to the computer on your LAN with the MAC
address that you will also specify.
Apply/Save
Click this button to save your changes and go back to the previous screen.
To Next Page
Loading...
Need help?
General
