Chapter 5 LAN Setup
Basic Home Station VDSL2 P8701T User’s Guide
108
Figure 35 IPv6 LAN Auto Configuration
The following table describes the fields in this screen.
Table 30 IPv6 LAN Auto Configuration
LABEL DESCRIPTION
Interface Address To use a static IPv6 address, enter the IPv6 address prefix and prefix length that the
VDSL Router uses for the LAN IPv6 address.
The IPv6 prefix length specifies how many most significant bits (starting from the
left) in the address compose the network address. This field displays the bit number
of the IPv6 subnet mask.
Enable DHCPv6 Server
Select this to have the VDSL Router act as a DHCPv6 server and pass IPv6
addresses, DNS server and domain name information to DHCPv6 clients.
Stateless Select this to have the VDSL Router use IPv6 stateless autoconfiguration.
To Next Page
Loading...
Need help?
General
