Chapter 2 User Setup Guide
Basic Home Station VDSL2 P8701T User’s Guide
26
2 Log into the VDSL Router’s web configurator and click Wireless network > Classic configuration
Wireless > Security. Enable the WPS function and select Enter STA PIN. Enter the PIN number
of the wireless client and click the Add Enrollee button. Click Apply/Save.
3 Activate WPS on the wireless client utility screen within two minutes.
The VDSL Router authenticates the wireless client and sends it the proper configuration settings.
This may take up to two minutes. The wireless client can then communicate with the VDSL Router
securely.
The following figure shows how to set up a wireless network and its security on a VDSL Router and
a wireless client by using PIN method.
To Next Page
Loading...
Need help?
General
