Chapter 5 Initial Setup Example
XGS2220 Series User’s Guide
104
4 For the VLAN2 network, enter 192.168.2.1 as the IP address and 255.255.255.0 as the subnet mask.
5 In the VID field, enter the ID of the VLAN group to which you want this management IP address to
belong. In this example, enter VLAN ID 2. This is the same as the VLAN ID you configure in the Static VLAN
screen.
6 Click Apply to save your changes back to the run-time memory. Settings in the run-time memory are lost
when the Switch’s power is turned off.
To Next Page
Loading...
