Chapter 6 Tutorials
XGS2220 Series User’s Guide
115
Figure 78 Tutorial: Enable DHCP Client & Option 60
6 You need to save the current configuration in a configuration file, so the Switch will load the auto
configuration file from the TFTP server automatically when rebooting. Go to the MAINTENANCE >
Configuration > Save Configuration screen. Click the Config 1, Config 2, or Custom Default button.
7 Click the same button in the MAINTENANCE > Reboot System screen to reboot the Switch, and load the
auto configuration setting as configured before. For example, if you save the auto configuration setting
to Config 1, you need to click the Config 1 button in the Reboot System screen.
Figure 79 Tutorial: Save Configuration
Figure 80 Tutorial: Save Configuration and Reboot System
8 Go to the MONITOR > System Log screen to see if auto configuration was performed successfully.
To Next Page
Loading...
