Chapter 4 Web Configurator
XGS2220 Series User’s Guide
75
After clicking Next, the Summary screen appears.
Figure 53 Wizard > Advanced Settings > Step 4 Summary
Each field is described in the following table.
Select all ports After you create a VLAN, select the ports to be assigned to the Networked AV VLAN.
Select all ports to assign the same role to all ports.
You can select a port by clicking it. Then click any of the following:
Click Tx/Rx to assign the ports for connecting to audio and video equipment.
Click Inter-switch to assign the ports for connecting to other switches.
Click Management to assign the ports for connecting to non-Audio-Video equipment (for
example, computer and NAS).
Link aggregate Select this option to aggregate multiple port bandwidth if you are connecting to another
switch. Link aggregation (trunking) is the grouping of physical ports into one logical higher-
capacity link.
Previous Click Previous to show the previous screen.
Next Click Next to show the next screen.
Cancel Click Cancel to exit this screen without saving.
Table 19 Wizard > Advanced Settings > Step 4 Summary
LABEL DESCRIPTION
Setup IP
Host Name This field displays a host name.
IP Interface This field displays whether the WAN interface is using a DHCP IP address or a static IP
address.
Table 18 Wizard > Advanced Settings > Step 3 Networked AV (continued)
LABEL DESCRIPTION
To Next Page
Loading...
