3D Systems ProJet 3500 Max Series User Manual

3D Systems, Inc.
11
High Speed (HS) Mode provides a 20% increase in build speed. This mode is offered on the ProJet® HD 3500Max and 3510HD 3D
Printer.
High Denition (HD) Mode allows the user rapid part making capability on a full platform. This mode produces high quality parts for
concept parts, verication designs and patterns for casting.
Ultra High Denition (UHD) Mode allows the users to build high resolution parts at 32 micron layer thickness with exceptional surface
nish and superior accuracy. Parts build in UHD mode are typically used for show parts, t testing and direct manufacturing using
patterns for investment casting of jewelry and small components.
Xtreme High Denition (XHD) Mode allows the users to build extremely high resolution parts at 16 micron layer thickness with
exceptional surface nish and superior accuracy. Parts build in XHD mode are typically used for show parts, t testing and direct
manufacturing using patterns for investment casting of jewelry and small components.
Expanded UHD Mode provides the user with an Expanded Ultra High Denition (UHD) mode build envelope which provides a 60%
larger build area vs. regular UHD mode.
Expanded XHD Mode provides the user access to the new Extreme High Denition (XHD) Mode that features a new print resolution
with the same expanded build envelope available in UHD. This provides a 60% larger build area vs. regular UHD mode.
E-mail Notication provides e-mail notication to the user when their job begins, completes, aborts and if the system is low on
material at any time during their build. Users can set their defaults and make changes as to what e-mail they will receive via the Job
Options window.
Part Stacking and Nesting features part stacking and nesting capability in both build modes. The user can utilize the entire build
volume by stacking parts vertically in the z-direction to ll up the entire build envelope with parts. The user can control the space
between layers to minimize support material usage and build time. Hours can be saved by stacking parts and submitting single, long
builds overnight and weekends.
Bounding Box Display in Print Preview allows le sizes that were previously too large for Print Preview to load successfully.
The Bounding Box Display only displays the bounding extents of a given geometry and does not try to resolve the triangles required to
display an entire geometry; refer to “Preview Build Job.“
Submission Checking: Both the 3-D Printing Client and Print Preview checks to make sure that the maximum allowable accumulated
build le size on the machine is not exceeded during job submission. The maximum threshold for job submission is roughly two
gigabytes or 40,000,000 triangles. See “Submit a Build Job.”
DESCRIPTIONS AND DEFINITIONS
PROJET
®
SYSTEMS SOFTWARE
The ProJet® 3D Modeling Accelerator is supported by computers running either Microsoft Windows XP, Windows Vista or Windows 7.0
operating Printers (both 32-Bit & 64-Bit operating Printers are supported). The software creates and controls job submission to your
printer.
The ProJet® 3D Modeling Accelerator Software upgrades and the software release notes that provides detailed instructions on how to
install your software are available in 3DS Central.
PACKAGING
DPPro UPGRADE KIT
• Do not damage or discard any packaging materials or carton(s). If the printer needs to be returned to the manufacturer, it should
be shipped in it’s original packaging. If other packaging is used, the customer will be responsible for any shipping damages that
may occur.
• Only Certied/Qualied Service Personnel can install the 3-D printer.
6
7
8
9
For owners of the ProJet 3510 MP and DP Printers, a kit (P/N 309604-00) is available to upgrade to the ProJet 3510 DPPro model.
Contact 3D Systems for information on purchasing the upgrade.

3D Systems ProJet 3500 Max Series Specifications

General

Brand	3D Systems
Model	ProJet 3500 Max Series
Category	3D Printers
Language	English